First we need to gain access to the Theft Deterrent Controller.
The module is located on the mounting bracket that holds the steering column
If the enclosure of your NEWROCKIES PRO Module is green and blue, please setup the switches as following (if enclosure is black, please submit a request to our support team for correct switch configurations):
Open the NEWROCKIES PRO Module's cover (this will NOT void the warranty) by removing the 2 screws on the bottom. Inside there are 2 sets of switches.
Set SW1 (8 switches) as following:
| DIP SWITCHES (SW1) | |||||||
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
| off | off | on | off | on | off | off | on |
Leave SW2 (10 switches) the way it is. Close the PRO Module's cover.
To install the NEWROCKIES PRO Module, connect it as following (the TDM should be left unplugged as it is not needed anymore):
|
PRO Bypass |
Car Wires |
|
RED |
to terminal K of the TDC plug wire color PNK/BLK |
|
BLK |
to terminal A of the TDC plug wire color BLK/WHT |
|
PPL |
to terminal E orf the TDC plug wire color BLK/YEL |
|
GRN |
Not Used |
|
YEL |
Not used |
|
WHT |
Not Used |
|
BRN |
Not used |
Leave the TDC unplugged.
IMPORTANT: If your car still does not start, please follow the troubleshooting directions for PASSKEY 1/2/3 Systems before contacting our support team. This will make it easier and faster for us to handle your support questions and will enable us to serve you better.
The installation is completed.
0 Comments